FAQ, News

How To Connect and Test RFID Card Dispenser?

ST-K750/K720 series RFID Card Dispenser is a high-performance card issuing machine, It can  support 13.56mhz RFID/NFC contactless card reading writing data.This dispenser main integrated into device that automatically service machine to sell ticket cards, bills,issue hotel key. Mainly used in Hotel check in/out kiosk,parking lot management system, freeway gate, self-service charging system, self-service card terminal, bank card management system, power payment and some self-service terminals etc.

Since the RFID card was widely apply in all aspects of life, we have lots of change to dealing with such device. Of course most of them were hidden in a nice looking housing around. But if you are a technical person or who relate to or involved in the self-service machine developed job. How to connect and test the RFID card dispenser when you first get it on hand? Here is what we do for the first connected. When first get the ST-K750/k720 RFID card dispenser, you may have only power cable, RS-232 cable, a rfid card dispenser. This is standard sell packing list. As a technical guy, you should prepare some things for going on the connection and test.
1. a Windows System PC;
2. PC has the RS232 DB9 I/O interface (if not, you need to prepare an USB-RS232 convertor/cable)
3. Power supplier in 24V/3A.
4. Test software that was From SNROTEK.

Below opeartions are shown you how to test the machine with our Test software:

With the above hardware connection, get back to the PC desktop, start up the test demo, start to test card position running: dispenser card to reading card position, to outside port hold on, drop card outside, put the card from the RFID card dispenser front mount, run it inside to the reading card position, to dispenser it out or collect it in the fail card bin etc…

When goes to the RFID card dispenser read and write data to a RFID card test. This card dispenserintegrated a RFID card reader module that can operate with those card meet ISO14443A&B Standard cards, frequency at 13.56MHz. Typical card model is from Mifare S50, S70, and compatiable card Fxxx Series from https://eng.fmsh.com/.
When there is further question, please contact your seller or feedback by email to sales@snrokiosk.com, we will reply you in a shortly time. Thanks.